50 Ton Power Press Machine
| Crankshaft Diameter | 102 mm |
| Adjustment stroke | 13-110 |
| Adjustment in Ram | 40 mm |
| Punch Hole in Ram | 50.8 mm |
| Hole in Bad | 130 mm |
| Length & Width of Bad | 457*736 mm |
| Thickness of Bad | 80 mm |
| Distance Between Bad to Ram | 381 mm |
| Stroke Per Minute | 35 |
| H.P. Required | 5 |
| Waight Approx. | 2450 |
- Why We are Best in Quality?
- Steel Heavy Helical Double Geared system
- Adjustable Stroke 102mm With Revolving Clutch.
- Heavy Fabricated Body With M.S. Plate
- Double Bed System( M.S, & C.I. )
- Double ” C ” System
- Ram, Road, Shaft & Heavy Helical Grade System
- Frame:
the frame Is of all construction, fabricated from steel Plates with Suitable Cross ribbings. Presses up to 30T will be supplied with C.I. Legs. Proper alignment of the frame is ensured by machining the cut sheet plates before welding.
- CLUTCH :
The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continuous stroke for mass production.
- CRANKSHAFT:
Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for perfect alignment
- FLYWHEEL:
Properly sized flywheel is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations
- GEARS:
Gears are of steel cast. Gear teeth are generated by hobbing
- TABLE & RAM:
Table and ram are made of heavy-duty cast iron & seasoned. They are perfectly aligned to each other quality pressings.
- LUBRICATION:
An efficient shot lubrication system has been provided for lubrication of the sliding surface and moving parts. The lubrication is achieved through the hand pump