80 Ton Power Press Machine

80 Ton Power Press Machine

Crankshaft Diameter 127 mm
Adjustment stroke  25-114
Adjustment in Ram 50 mm
Punch Hole in Ram 57 mm
Hole in Bad 200 mm
Length & Width of Bad 660*910 mm
Thickness of Bad 90 mm
Distance Between Bad to Ram 508 mm
Stroke Per Minute  
H.P. Required 10
Waight Approx. 4000
  • Why We are Best in Quality?
  1. Steel Heavy Helical Double Geared system
  2. Adjustable Stroke 115mm With Revolving Clutch.
  3. Heavy Fabricated Body With M.S. Plate
  4.  Double Bed System( M.S, & C.I. )
  5. Double ” C ” System
  6. Ram, Road, Shaft & Heavy Helical Grade System

 

  • Frame:

the frame Is of all construction, fabricated from steel Plates with Suitable Cross ribbings. Presses up to 30T will be supplied with C.I. Legs. Proper alignment of the frame is ensured by machining the cut sheet plates before welding.

  • CLUTCH :

The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continuous stroke for mass production.

  • CRANKSHAFT:

Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for perfect alignment

  • FLYWHEEL:

Properly sized flywheel is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations

  • GEARS:

Gears are of steel cast. Gear teeth are generated by hobbing

  • TABLE & RAM:

Table and ram are made of heavy-duty cast iron & seasoned. They are perfectly aligned to each other quality pressings.

  • LUBRICATION:

An efficient shot lubrication system has been provided for lubrication of the sliding surface and moving parts. The lubrication is achieved through the hand pump